Q060 RS | Inner distribution | TS0 · TS1 · TS2
Divider systems
The divider system is mounted on each crossbar as a standard – on every 6 th section for crossbar mounting (HS). As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping onto a socket (available as an accessory). The socket additionally acts as a spacer between the dividers and is available in 1 mm sections between 3 – 50 mm (version B) .
Inner heights
38
Inner widths
Divider system TS0 without horizontal shelf
38 – 500
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
38
13.5 13 10 –
A
The dividers can be moved in the cross section.
Incre- ments
KR
a T
a x
a c
a T
13
3
1 mm
Divider system TS1 with continuous horizontal shelf
VD1 VD2 VD3 VD23
a T max [mm]
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
9.5
9.5
13.5 20 13 10 2
A
17
2 1 3
24.5
11
The dividers can be moved in the cross section.
24.5
17
9.5
9.5
4
KR
a T
a x
a c
13
a T
3
Divider system TS2 with partial horizontal shelf
VR0 VR1 VR2 VR3 VR23
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
13.5 13
7
2
9.5
9.5
A
17
2 1 3
24.5
11
38
24.5
4
With grid distribution (1 mm grid) . The dividers are attached by the horizon- tal shelf; the grid can be moved in the cross section.
17
9.5
9.5
KR
13
a T
a x
a c
a T
6
405
Powered by FlippingBook