Q060 RE | Inner distribution | TS0 · TS1 · TS2
Divider systems
For applications with lateral accelerations and applica- tions with the cable carrier rotated by 90°, the dividers can easily be fixed by turning the crossbar by 180°. The arresting cams click into place in the locking grids in the crossbar (version B) . The groove in the crossbar faces outwards.
The divider system is mounted on each crossbar as a standard – on every 6 th section for crossbar mounting (HS). As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
Inner heights
42
Inner widths
Divider system TS0 without horizontal shelf
68 – 276
a x min [mm]
a c min [mm]
a x grid [mm]
n T min
Vers. a T min [mm]
38
A B
14 13 8.8
– –
14 16 11.8 8 –
Incre- ments
The dividers are movable within the cross section (version A) or fixed (version B).
KR
a T
a x
a c
a T
13
4.2
8 mm
Divider system TS1 with continuous horizontal shelf
VD1 VD4
VD5
VD45
a T max [mm]
a x min [mm]
a c min [mm]
a x Raster [mm]
n T min
Vers. a T min [mm]
8
8
A B
1425138.8 – 2 14 29 16 11.8 8 2
19
4 1 5
30
2 3
18
30
19
4
8
8
The dividers can be moved in the cross section.
KR
a T
a x
a c
13
a T
4.2
Divider system TS2 with partial horizontal shelf
VR0
VR2
VR3
VR23
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
A B
14 14
13 16
8.8
2 2
14
14
4 1 5
24
2 3
11.8
42
6
24
4
14
14
With grid distribution (8 mm grid) . The dividers are attached by the horizon- tal shelf; the grid can be moved in the cross section.
KR
a x
13
a T
a c
a T
4.2
409
Powered by FlippingBook