Q080 RS | Inner distribution | TS0 · TS1 · TS2
Divider systems The divider system is mounted on each crossbar as a standard – on every 8 th section for crossbar mounting (HS). As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping onto a socket (available as an accessory). This socket additionally acts as a spacer between the dividers and is available in a 1 mm grid between 3 – 50 mm, as well as 16.5 and 21.5 mm (version B) .
Inner heights
58
Inner widths
Divider system TS0 without horizontal shelf
50 – 600
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
58
11 14 10 –
A
Incre- ments
The dividers can be moved in the cross section.
1 mm
KR
a T
a x
a c
14
a T
4
Divider system TS1 with continuous horizontal shelf
VD1 VD2 VD3 VD4 VD5 VD23 VD45
a T max [mm]
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
12
12
11 25 14 10 2
A
19.5
19.5
4 1 5
27
34.5
2 3
42
11
26
42
The dividers can be moved in the cross section.
34.5
27
19.5
19.5
4
12
12
KR
a T
a x
a c
14
a T
4
Divider system TS2 with partial horizontal shelf
VR0 VR1 VR2 VR3 VR4 VR5 VR23 VR45
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
12
12
11 14 10 2
A
19.5
19.5
4 1 5
27
34.5
2 3
42
11
26
58
4
42
With grid distribution (1 mm grid) . The dividers are attached by the horizontal shelf; the grid can be moved in the cross section.
34.5
27
19.5
19.5
12
12
KR
14
a T
a x
a c
a T
4
415
Powered by FlippingBook