Q080 RV | Inner distribution | TS3
Divider system TS3 with horizontal shelf consisting of plastic partitions
VR0 VR1 VR2
VR4
VR6
VR15 VR145
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
13
10 13
2 3 6 7
8 16 / 42* 8
2
A
27 20
27
4 1 5
58
* For aluminum partitions
48
10 10 13 13
41
27 34
4
The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.
KR
a T
a x
a c
8
a T
a x (center distance of dividers) [mm] a c (nominal width of inner chamber) [mm]
4
When using plastic partitions with a x > 112 mm , we recommend an additional center support with a twin divider (S T = 4 mm). Twin dividers are also suitable for ret- rofitting in the partition system. The horizontal shelves VR4 and VR6 are not possible when using twin dividers. 16 18 23 28 32 33 38 43 48 58 64 68 81015202425303540505660 78 80 88 96112128144160176192208 70 72 80 88104120136152168184200
a x
Aluminum partitions in 1 mm increments with a x > 42 mm are also available.
Order example
TS3
.
A
.
3
.
K1
.
16
-
VR1
K4
208
VR7
.
.
-
Divider system
Version
n T
Chamber
a x
Horizontal shelf
Please state the designation of the divider system (TS0, TS1,...) , the version, and the number of dividers per cross section [n T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [a T /a x ]. When using divider systems with horizontal shelf (TS1 – TS3) , please additionally state the positions (e.g. VD23) viewed from the left moving bracket belt. You are welcome to add a sketch to your order.
418
Powered by FlippingBook