Q100 RS | Inner distribution | TS0 · TS1
Divider systems The divider system is mounted on each crossbar as a standard – on every 8 th section for crossbar mounting (HS). As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping onto a socket (available as an accessory). The socket additionally acts as a spacer between the dividers and is available in 1 mm sections between 3 – 50 mm (version B) .
Inner heights
72
Inner widths
Divider system TS0 without horizontal shelf
70 – 600
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
72
11 15 10 –
A
Incre- ments
The dividers can be moved in the cross section.
1 mm
KR
a T
a x
a c
15
a T
5
Divider system TS1 with continuous horizontal shelf
VD1
a T max [mm]
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
11 25 15 10 2
A
33.5
1
The dividers can be moved in the cross section.
33.5
5
KR
a T
a x
a c
15
a T
5
Order example
TS1
.
A
.
3
-
VD1
VD3
-
Divider system
Version
n T
Horizontal shelf
Please state the designation of the divider system (TS0, TS1,...) , the version, and the number of dividers per cross section [n T ]. When using divider systems with horizontal shelf (TS1) , please additionally state the positions (e.g. VD1) viewed from the left side band. You are welcome to add a sketch to your order.
427
Powered by FlippingBook