Q100 RE | Inner distribution | TS3
Divider system TS3 with horizontal shelf consisting of plastic partitions
VR0 VR1 VR2 VR4
VR167 VR6 VR8
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
13
17 13 13 17
4 8 1 5 9
20
8 16/42*
8
2
A
6 2 3 7
34 27
72
* For aluminum partitions
55 62
48
34 41
4
The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.
KR
a T
a x
a c
a T
8
a x (center distance of dividers) [mm] a c (nominal width of inner chamber) [mm]
4
When using plastic partitions with a x > 112 mm , we recommend an additional center support with a twin divider (S T = 4 mm). Twin dividers are also suitable for retrofitting in the partition system. The horizontal shelves VR8 and VR9 are not possible when using twin dividers. 16 18 23 28 32 33 38 43 48 58 64 68 81015202425303540505660 78 80 88 96112128144160176192208 70 72 80 88104120136152168184200
a x
Aluminum partitions in 1 mm increments with a x > 42 mm are also available.
Order example
TS3
.
A
.
2
.
K1
.
16
-
VR1
K4
VR9
208
.
.
-
Divider system
Version
n T
Chamber
a x
Horizontal shelf
Please state the designation of the divider system (TS0, TS1,...) , the version, and the number of dividers per cross section [n T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [a T /a x ]. When using divider systems with horizontal shelf (TS1 – TS3) , please additionally state the positions (e.g. VD23) viewed from the left side band. You are welcome to add a sketch to your order.
434
Powered by FlippingBook