TKR0150.030 | Inner distribution | TS0 · TS1
Divider systems As standard, the divider system is mounted on every 2 nd chain link As a standard, dividers and the complete divider system (dividers with horizontal shelves) can be moved in the cross section (version A).
The dividers are easily attached to the crossbar for appli- cations with transverse accelerations and for applications laying on the side by simply turning them. The arresting cams click into place in the locking grids in the crossbars (version B) .
Inner heights
22
Inner widths 20 – 60
Divider system TS0 without horizontal shelf
a x min [mm]
a c min [mm]
a x grid [mm]
n T min
Vers. a T min [mm]
A B
5 6 4 – – 6 6 4 2 –
22
KR
a T
a x
a c
6
2
a T
Divider system TS1 with continuous horizontal shelf
VD1
a x min [mm]
a c min [mm]
a x grid [mm]
n T min
Vers. a T min [mm]
A B
5 6 4 – 2 6 6 4 2 2
9.7
1
9.7
2.6
KR
a T
a x
a c
6
2
a T
Order example
TS1
.
A
.
3
-
VD0
VD1
-
Divider system
Version
n T
Horizontal shelf
Please state the designation of the divider system (TS0, TS1 …) , version and number of dividers per cross section [n T ]. If using divider systems with horizontal shelf (TS1) please also state the positions [e.g. VD1] viewed from the left side band. You are welcome to add a sketch to your order.
443
Powered by FlippingBook