MT0950 | Installation dim. | Unsupported · Gliding
Unsupported arrangement
L S
KR [mm] 140* 170*
H [mm]
H z [mm]
L B [mm]
U B [mm]
L f
Inner heights
U B
L S /2
360 420 480 600 660 720 840
405 630275 465 725305 525 819335 645 1007 395 705 1102 425 765 1196 445 885 1384 515
54.5
200 260 290 320 380
L B
H H z
t
KR
Fixed bracket
Moving bracket
Inner widths 77 – 600
* not RMD
50.0
Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight q k = 7 kg/m. For other inner widths, the maximum additional load changes.
10.0
5.0
Acceleration up to 25 m/s 2
Speed up to 6 m/s
1.0
L f in m
1.0 1.5
2.0 2.5
3.0 3.5
4.0
Travel length up to 7.4 m
Additional load up to 35 kg/m
L S in m
2.0 3.0
4.0 5.0
6.0 7.0
8.0
Gliding arrangement | GO module with chain links optimized for gliding
L S
KR [mm] 170*
H [mm]
n RKR
L B [mm]
U B [mm]
L S 2
U B
240 240 240 240 240 240
4 4 4 4 4 4
1710 773 1995 888 2565 1114 2755 1183 3040 1296 3610 1523
RKR
200 260 290 320 380
L B
H
t
KR
Moving bracket Fixed bracket
* not RMD
Speed up to 2 m/s
Acceleration up to 2 – 3 m/s 2
A gliding cable carrier must be installed in a guide channel. See p. 702. The GO module mounted on the drive end is a defined sequence of 4 different KR/RKR link plates. Glide shoes have to be used for gliding applications.
Travel length up to 230 m
Additional load up to 35 kg/m
519
Powered by FlippingBook