MT0950 RMD | Dimensions · Technical data
Aluminum cover RMD – cover with hinge in the outer radius ■ ■ Aluminum lid with hinge for light and medium loads. Assembly without screws. ■ ■ Available customized in 1 mm sections .
■ ■ Outside : swivable to both sides. ■ ■ Inside: release by turning 90°.
B i 100 – 600 mm in 1 mm width sections
Crossbar arrangement on each chain link (VS: crossbar every link)
1 mm
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume. Calculating the cable carrier length Cable carrier length L k L k ≈ ––– + L B L S 2
Recommended max. Ø 43 mm
B i B k
19.5
Clip-on glide shoes for extended travel lengths
Cable carrier length L k rounded to pitch t
h i [mm]
h G [mm]
h G' [mm]
h G' Offroad [mm]
B i [mm]*
B k [mm]
KR [mm]
q k [kg/m]
200 260 290 320 380 6.12 – 17.13
100 – 600
B i + 39
54.5 80 83.5
86
* in 1 mm width sections
Order example
MT0950
.
400
.
.
200
-
L k [mm] 2850
VS
Crossbar option RMD
Type
B i [mm]
KR [mm]
Crossbar arrangement
520
Powered by FlippingBook