MT1250 RDD | Inner distribution | TS3
Divider system TS3 with horizontal shelf made of plastic partitions
VR0 VR1 VR2 VR4 VR6 VR8 VR167
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
13
13
4 8 1 5 9
20
B
4 / 16* 16 / 42** 8
2
27
6 2 3 7
34
9.5 17 17
* For VR0 ** For aluminum partitions.
68.5
58.5
44.5 51.5
30.5 37.5
4
KR
The dividers are fixed by the partitions, the complete divider system is fixed in the cross section.
a T
a x
a c
8
a T
a x (center distance of dividers) [mm] a c (nominal width of inner chamber) [mm]
4
When using plastic partitions with a x > 112 mm , we recommend an additional center support with a twin divider (S T = 4 mm). Twin dividers are also suitable for retrofitting in the partition system. The horizontal shelves VR8 and VR9 are not possible when using twin dividers. 16 32 48 64 80 96112128144160176192208 8 24 40 56 72 88 104 120 136 152 168 184 200
a x
Aluminum partitions in 1 mm width sections with a x > 42 mm are also available.
Order example
TS3
.
A
.
3
.
K1
.
34
-
VR1
K4
38
VR3
.
.
-
Divider system
Version
n T
Chamber
a x
Horizontal shelf
Please state the designation of the divider system (TS0, TS1 …) , version and number of dividers per cross section [n T ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly dis- tances [a T /a x ] (as seen from the moving bracket). If using divider systems with horizontal shelf (TS1, TS3) please also state the positions [e.g. VD23] viewed from the left side band. You are welcome to add a sketch to your order.
532
Powered by FlippingBook