ROBOTRAX ® System | System components
PBU pull back unit/guide bracket (available for all types) PBU: With fast movement sequences and large work envelopes, the relatively long carriers knock against the robot arm. The repeated impact significantly reduces the service life of the cable carrier and the cables within, and the entire system can fail. Downtimes cause high costs and problems in the manufacturing process – so they have to be avoided.
Inner heights
10 – 31
Inner widths
27 – 64
The PBU is available with a variety of different parameters. Please contact us.
Guide bracket: The guide bracket ensures a defined return into the PBU, with the ROBOTRAX ® gliding through the bracket. This reliably prevents the cable carrier from knocking against the robot arm. Installation of the guide bracket is easy and quick. The bracket is easy to open and allows easy and fast cable installation. The guide bracket can be combined with the standard bracket and is available for all ROBOTRAX ® sizes.
Protector The service life of the cable carriers and cables is significantly reduced by impact during fast movement sequences and in large work envelopes. The Protector protects the cable carrier against hard impacts, excessive abrasion and premature wear, while also acting as a limitation for the smallest bending radius. Downtimes are minimized. The entire cable carrier does not have to be replaced, but only the Protector in some cases.
Please state when ordering.
559
Powered by FlippingBook