LS/LSX series | Overview
7
6
5
4
3
2
1
Inner heights
48 – 58
Chain widths
LS series Side bands made of hardened steel as a standard LSX series
100 – 600
Side bands made of steel resistant to rust and acid
8 9 10
11
12
1 All crossbars available in 1 mm width sec- tions 2 4 -fold bolted alumi- num crossbars for extreme loads 3 Rolling crossbars 4 Aluminum hole cross- bars
5 M ounting crossbars 6 S tops integrated into link plate – no addi- tional bolts required 7 D ifferent separation options for the cables 8 P lastic or steel dividers
9 Weight-optimized side bands made of hard- ened steel or stainless steel 10 Optional center bolt for applications with high loads 11 Good ratio of inner to outer width – no end divider required
12 Mounting brackets for different connection options
Features ■ ■ Weight-optimized one-part link plate design
The design The weight-optimized link plate design makes the cable carriers very light yet highly sturdy. For the LS series, the unsupported length is significantly higher compared to plastic cable carriers of a similar size.
■ ■ Better value than comparable steel cable carriers ■ ■ Significantly higher unsupported lengths compared to plastic cable carriers of a similar size ■ ■ Integrated radius and pre-tension stops – in a good value design ■ ■ Bolted crossbar systems, solid mounting brackets
1 mm
■ ■ Cover with steel band available on request ■ ■ Also possible as a double band solution ■ ■ Good corrosion resistance
Weight-optimized link plates consist of only one plate – the stop system is integrated
Lightweight side bands without additional bolts – hardened steel or stainless steel
Optional: Center bolts and circlip for applications with high loads
Optional: C-rail for strain relief elements attached in the connection
565
Powered by FlippingBook