S/SX1250 RS 2 | Inner distribution | TS0 · TS1
Divider systems The divider system is mounted on each crossbar as a standard – on every 2 nd chain link for crossbar mounting (HS). As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping onto a socket (available as an accessory). The socket additionally acts as a spacer between the dividers and is available in 1 mm increments between 3 – 50 mm (version B) .
Inner heights
72
Chain widths
Divider system TS0 without horizontal shelf
200 – 500
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
A
12.5 15 10 –
72
Incre- ments
The dividers can be moved in the cross section.
KR
1 mm
End divider
a T
a x
a c
15
5
a T
B i
Divider system TS1 with continuous horizontal shelf
VD1
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
A
12.5 15 10 2
33.5
1
The dividers can be moved in the cross section.
33.5
Ø 5
KR
End divider
a T
a x
a c
15
5
a T
B i
Order example
TS1
.
A
.
3
-
VD0
VD1
-
Divider system
Version
n T
Horizontal shelf
Please state the designation of the divider system (TS0, TS1 …) , version and number of dividers per cross section [n T ]. If using divider systems with horizontal shelf (TS1) please also state the positions [e.g. VD1] viewed from the left side band. You are welcome to add a sketch to your order. The mounting brackets are part of the cable track and don‘t have to be ordered separately.
617
Powered by FlippingBook