Lubrication and Maintenance
GENERAL RECOMMENDATIONS
Maintenance Instructions
Series
Lubricant
Maintenance*
Pre-lubricated with grease. No lubrication maintenance required.
MZ, BB,
Grease
BUS200, PBUS
Grease Grease Grease
Change the grease and clean the inside of the Cam Clutch every six months.
BRUE
Add the grease for both bearings every three months. Add the grease for both bearings every three months.
MZEU MZEU
12 to 80 90 to 50
Oil Oil
Change the oil and clean the inside of the Cam Clutch every three months. Change the oil and clean the inside of the Cam Clutch every six months. Add oil every 100 hours. Change the oil and clean the inside of the Cam Clutch every three months. Add oil every 300 hours. Change the oil and clean the inside of the Cam Clutch every three months.
TSS, TFS
MGUS, MIUS
Oil
MGUS-R
Oil
Pre-lubricated with grease. No lubrication maintenance required unless specified.
BS 1
30 to 75
Grease
Pre-lubricated with grease. Drain and clean inside of the Cam Clutch and inject new grease once a year.
BS-F 1
85 to 465
Grease
Pre-lubricated with grease. No lubrication maintenance required unless specified.
BSEU, BRUS
Grease
Cam Clutch Box
Oil
Lubrication maintenance is necessary only once a year for normal use.
* These are general guidelines. Actual maintenance may vary depending on usage and operating conditions. 1. BS and BS-F have specific lubrication requirements, please refer to the individual instruction manuals.
The clutch should receive proper care and lubrication to ensure maximum long-life performance. Please see the recommendations below. If Cam Clutch is being used outside of the temperature ranges, please contact Tsubaki. Note that the following are general guidelines. Some Cam Clutch series require different lubrication than listed below. Follow the recommendations for the specific series when applicable. See the instruction manual which came with your unit. Instruction manuals are also available at our web site.
Overrunning and Backstopping Applications Oil Recommendations for Ambient Temperature Ranges
+14°F to +86°F (-10°C to +30°C)
-86°F to +122°F (+30°C to +50°C)
Any Automatic Transmission Fluid (ATF) Shell Turbo Oil T32, Turbo Oil 68, Rimulla D Oil 10W Exxon Mobil DTE Oil Light, Delvac Hydraulic 10W, ATF220 Teresstic Oil 68, DTE Heavy Medium Texaco Regal Oil R&O 68, Chevron GST Oil 68 BP Rnergol THB32, Gulf Harmony 32
Exxon Mobil Delvac 1330 Essolube XT1 10W-30 Shell Rimulla D Oil 20W/20 Rimulla D Oil 30
White Parrot Super S-3-20W-20, 30
Note: Do not use lubricants that contain EP additives
Indexing Applications Oil Recommendations for Ambient Temperature Ranges
+20°F to +86°F (-7°C to +30°C) At 150 strokes per minute or less
-10°F to +20°F (-23°C to -7°C) At 150 strokes per minute or less
Any Transmission Fluid (ATF), Shell Turbo Oil 32 Exxon Mobil DTE Oil Light, Teresstic Oil 32 Texaco Regal Oil R&O 32, Amoco Industrial Oil 32
Any Transmission Fluid (ATF) Shell Clavus Oil 15 Exxon Mobil Zerice 46, Sunoco Sunvis 916
Note: Do not use lubricants that contain EP additives
General Purpose Cam Clutch Applications Grease Recommendations for Ambient Temperature Range +20°F to +104°F (-5°C to +40°C)
Shell Fiske Bros. Kyodo Yushi Petro-Canada
Alvania Grease S1, Sunlight Grease 1, Aeroshell No.7, Aeroshell No.22 Lubriplate Low-Temp, Aero Lubriplate Multemp PS No.1 PRECISION Synthetic
Note: Do not use lubricants that contain EP additives
www. ustsubaki .com
99
Powered by FlippingBook