HOW TO ORDER
MZEU SERIES CAM CLUTCH
MZEU Series is a general purpose Cam Clutch suitable for a wide variety of applications. A selection of add-on flanges and torque arms are available enabling this Cam Clutch to easily fit where custom designed products were previously required. MZEU12 to MZEU80 are pre-greased, requiring no lubrication. MZEU90 to MZEU150 require oil lubrication. Contact Tsubaki for indexing applications above 50 cycles per minute.
Example How to Order Code: MZEU Series Cam Clutch
MZEU 12 K E1 – E2
Specifications
Torque Capacity lb.ft. (Nm)
Series
Size
Keyway Option
Mounting Options*
Bore Size
12 15 20 25 30 35 40 45 50 55 60 70 80 90
12 mm 44 15 mm 74 20 mm 181 25 mm 313 30 mm 542 35 mm 749 40 mm 996 45 mm 1195 50 mm 1527 55 mm 1770 60 mm 2176 70 mm 3105 80 mm 3813 90 mm 8851 100 mm 12981 130 mm 18070 150 mm 24930
(60)
(100) (245) (425) (735)
No Designator: Cam Clutch Only
(1015) (1350) (1620) (2070) (2400) (2950) (4210) (5170) (12000) (17600) (24500) (33800)
Blank: Keyway on inner race only. No keyway on the outer race.
MZEU: General applications (Indexing, Overrunning and Backstopping)
E1: Mounting Flange Style 1 E2: Mounting Flange Style 2
E3: Torque Arm Flange E4: End Cover Flange
K: Keyway on the outer race and keyway on inner race.
E5: Mounting Flange Style 5 E7: Mounting Flange Style 7
100 130 150
*Specifics and combinations of flanges are shown on the following pages.
Shown below is a Basic MZEU Cam Clutch plus this same Cam Clutch outfitted with various combinations of available flanges and torque arms. These additional components are detailed in the following pages.
Basic type with outer keyway
E3 torque arm + E4 cover
E5 flange + E5 flange
E2 flange + E7 flange
Basic type
E1 flange + E2 flange
E2 flange + E3 torque arm
60
Powered by FlippingBook