ENGINEERING INFORMATION
III. Selection Procedure for Roller Table Determine the Roller Table size with the following capability graphs: ST Roller Table Conveyor Capability Graph
Guide for ST Roller Table
• Liner should be shaped to avoid plastic roller wear. • Liner width (W 1 ) should be C 1 (effective width) minus (0.394 inches). • Material of liner should be high polymer polyethylene.
How to use the graph: If W equals 61 lbs./ft. 2 and the conveyor length equals 32.8 ft., Roller Table numbers ST514 to ST504 can be used. W [Weight of conveyed load (lbs./ft. 2 )]
■ Roller Table speed should not exceed 160 ft./min.
= Weight of conveyed object (lbs.) Base area of conveyed object (ft. 2 )
B-62
Powered by FlippingBook