U.S. TSUBAKI TOP CHAIN
Selection and Engineering Information
Materials
Specifications
Lubricated Dry Suggested Max. Speed (ft./min.)
Max. Allowable Load lbs.
Ambient Temperature °F
Chain Type
Feature
Applications
Chain/Pin
Top Plate
15
Type P : Suitable for single strand operation Type SS: Suitable for multi-strand operation and corrosive environment Type CS: Suitable for heavy load operation
430 Stainless steel 304 Stainless steel 430 Stainless steel 430 Stainless steel
Assembly line for bottling or canning, and conveying car- tons or other parts.
390
200
TS-P
Carbon Steel
660
350
–4
304 Stainless steel Hardened carbon steel 304 Stainless steel
230
150
TS-SS
231
750
15
390
200
TS-CS
1,100
350
15
TT-N
330
500
Simple construction, washable, clean handling, and anti-corrosive.
200
330
–4
TT-SS
304 Stainless steel
484
750
Conveying steel, cans, finished parts, paper- packages, etc.
Self-lubrication, quiet operation. Anti-corrosive, suitable for transporta- tion of small size goods due to small clearance between top plates.
TP
264
–4
304 stainless steel
Polyacetal resin
160
330
170
TTP
187
TN
Carbon steel
15
Damage-free, quiet operation. Smooth transportation, easy removal of top plate. Easy repair.
200
390
1,410
170
304 Stainless steel 304 Stainless steel Nickel-plated carbon steel
Polyacetal resin
TN-NP
–4
150
231
230
TN-S
170
Quiet and trouble-free operation with anti-corrosive protection. Also available in “E,” “K,” “Y,” and “SY” series.
Conveying elec- tronic parts and small items. Curved opera- tion for type TS and TT.
–4
40P, 2040P: 100 60P: 200
Polyacetal resin
200
200
RS-P
170
15
430 Stainless steel
200
902
330
TRU
Carbon steel
Float-prevention tab allows high speed, complex, and curved transportation. Easy removal of chain. Used for low speed and simple curved operation. Same features as TT. Used for curved operation.
350
–4
231
230
150
TRU-SS
304 Stainless steel
750
15
430 Stainless steel
638
150
150
TKU
Carbon steel
350
–4
Curved opera- tion for TT. Curved opera- tion for TP. Curved opera- tion for TN.
484
260
160
TTU
304 Stainless steel
750
–4
304 Stainless steel
Polyacetal resin
Same features as TP and TRU.
220
260
160
TPU
170
TNU
Carbon steel
15
Used for simple curved operation. TN type side bow feature.
Polyacetal resin
902
330
200
170
Nickel-plated carbon steel
TNU-NP
Any horizontal curved operation is possible. Min. radius: 4.00 inches. Complex curved operation is available. Any return such as straight/curved line on horizontal and vertical route is available. Complex curved operation available.
Suitable for hor- izontal curved operations.
660
TO
15
430 Stainless steel
200
200
Carbon steel
350
220
TU
Step 1
Top Plate Chain Selection Follow the procedure below to select top chain and liner that are most economical and suitable for the application. Step 1: Establish general conveyor conditions Step 2: Select top plate material Step 3: Select liner material Step 4: Determine factors and coefficients Step 5: Select top plate width Step 6: Calculate chain tension Step 7: Determine chain size
Establish general conveyor conditions
(2) Interval (3) Conveyor speed (4) Lubrication requirements (5) Material conveyance regularity
A) Materials conveyed (1) Container material (2) Weight (3) Dimensions B) Conveyor arrangement
D) Environment
(1) Temperature (2) The presence of corrosive chemical substances (See page B-76, Table I) (3) Existence of wear-causing agents, such as glass, paint, metal, powder, or sand
(1) Straight or curved movement (2) Conveyor length (3) Layout (4) Space limitations
C) Other conditions
(1) Conveyor capacity
B-75
Powered by FlippingBook