HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 100
Chain Data Size
100
Pitch
1 1/4"
Inside Width
3/4"
1 1/4” Pitch
Taper-Lock
Roller Diameter
0.750" 0.692"
Nominal Tooth Width:
How to Order Code: Example Model # for 100 Pitch TAPER-LOCK Carbon Steel Sprockets A 100 B TL 18
Altered !!
Chain Pitch in Inches
Hub Type
TAPER-LOCK
Number of Teeth
11 18 28 12 19 30 13 20 32 14 21 35 15 22 36 16 24 40 17 26
B: Hub Extension One Side
TAPER-LOCK hub with set screws
A: Alteration Required
100: 1¼" Pitch
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TAPER-LOCK Bushings
TAPER-LOCK bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
Bushing #
Bore Range
1615 2012 2517 3020
0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688" 0.875 - 3.250"
114
Powered by FlippingBook