HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 120
Chain Data Size
120
Pitch
1 1/2" 1.00" 0.875" 0.924"
Inside Width
1 1/2” Pitch
Taper-Lock
Roller Diameter
Nominal Tooth Width:
How to Order Code: Example Model # for 120 Pitch TAPER-LOCK Carbon Steel Sprockets A 120 B TL 19
Altered !!
Chain Pitch in Inches
Hub Type
TAPER-LOCK
Number of Teeth
12 17 21 14 18 24 15 19 26 16 20 30
B: Hub Extension One Side
TAPER-LOCK hub with set screws
A: Alteration Required
120: 1½" Pitch
35 60 36 70 45 80
C: Hub Extension Both Sides
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TAPER-LOCK bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK Bushings
Bushing #
Bore Range
2012 2517 3020 3030 3535
0.500 - 2.125" 0.500 - 2.688" 0.875 - 3.250" 0.938 - 3.250" 1.188 - 3.938"
122
Powered by FlippingBook