HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 140
Chain Data Size
140
Pitch
1 3/4" 1.000" 1.000" 0.924"
Inside Width
1 3/4” Pitch
QD
Roller Diameter
Nominal Tooth Width:
A 140 SF 13 How to Order Code: Example Model # for 140 Pitch QD Carbon Steel Sprockets
Altered !!
Chain Pitch in Inches
QD Hub Type
Number of Teeth
11 12 14 15 23 24
13
SF: QD Hub 11 - 13 tooth sprocket E: QD Hub 14 - 22 tooth sprocket F: QD Hub 23 - 36 tooth sprocket J: QD Hub 40 - 60 tooth sprocket M: QD Hub 70 & 80 tooth sprocket
16 17 25 26
18 19 30 35
20 21 36
22
A: Alteration Required
140: 1¾" Pitch
40
48
60
45 70 80
54
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
QD bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
QD Bushings
Bushing #
Bore Range
SF
0.500 - 2.938" 0.875 - 3.500" 1.000 - 4.000" 1.500 - 4.500" 2.000 - 5.500"
E F J
M
132
Powered by FlippingBook