SPROCKET CONSTRUCTION TYPES / STYLES ENGINEERING CLASS
STANDARD SPROCKETS / TRACTION WHEELS ENGINEERING CLASS SPROCKET QUOTATION DATA SHEET
Customer Name
Name/Surveyor
Chain Saver Sprockets • A unique design that incorporates a special flanged rim on either side of the sprocket body. The chain sidebars rest on the flange as the chain wraps around the sprocket. This configuration keeps the chain on true center and distributes the load over a greater contact area, thus reducing the rate of wear.
Application Type
Site/Location
Phone
Customer Name
Mounting Configurations
Drive
Tail
(Choose One)
Traction Rim / Wheel • Essentially a sprocket without teeth. • Available as a solid, segmented or a segmented/split design.
Rough Stock Bore
Plain Bore
• Ideal for single strand bucket elevators and/or abrasive conveyor applications. • Coefficient of friction must be great enough to allow the wheel to drive. • Key Benefit – Allows the chain to slip in an overload or obstructed condition.
Keyway & 2 Set Screws
Bronze Bushing
Octagonal Wheel • Utilized with Heavy Duty Hard Faced Drag Chains.
Power Lock
Notes
Taper-lock Bushing
• Octagon shape allows the dynamic forces to be transferred directly between chain sidebars and the flats of the octagon. This eliminates the traditional sprocket tooth/ chain bushing wear point. • Guide lugs are typical and keep the chain on center. • Hardfacing available for extreme conditions.
QD Bushing
ER Bushing
Other (specify below)
Construction Details
Full-Face Drum Sprocket • Highly respected design regularly utilized with both Welded Mill and Welded Drag chain. • Full-Face design offers an increased surface area which reduces contact
Drive Shaft Diameter
Drive
Tail
(Check all that apply)
A-Plate
Drive Number of Teeth
B-HUB
pressures and in turn offers solid wear performance. • Available in single and multi-strand configurations.
B-HUB
C-HUB
A-PLATE
SPLIT C-HUB
C-HUB
Tail Shaft Diameter
Split HUB
Segmented
Tail Number of Teeth
A-Plate Drum Sprocket • Classic, traditional style utilized with both Welded Mill and Welded Drag chain. • Can handle misalignment quite well.
Hunting Tooth
Double Duty
Notes
• Open design allows for bulk material pass through. • Available in single and multi-strand configurations.
Chain Saver
Traction Rim / Wheel
Octagonal Wheel
Lightening Holes
www. ustsubaki .com
184
185
Powered by FlippingBook