No. 40
MULTI-STRAND TAPER-LOCK ® SPROCKET DIMENSIONS
U.S. TSUBAKI STOCK SPROCKETS
HOW TO ORDER
U.S. Tsubaki Stock Sprockets
All dimensions in inches unless noted.
Double Strand No. 40 TAPER-LOCK ® Sprockets
Chain Data Size
Dimensional Data
40 - 2
No.
Pitch
1/2"
Outside Diameter
Hub Diameter
Hub Type
Hub Style
Weight Lbs.
No. Teeth
Bushing # MAX Bore*
LTB
1/2" Pitch: MULTI-STRAND TAPER-LOCK ® 40
Inside Width
5/16"
15 16 17 18 19 20 21 23 25 30 36 42 48 52 60 84
2.652 2.814 2.975 3.135 3.296 3.457 3.617 3.938 4.258 5.057 6.015 6.972 7.928 8.566 9.841
1008 1008 1008 1210 1210 1610 1610 1610 2012 2012 2012 2517 2517 2517 2517 2517
1.000 1.000 1.000 1.250 1.250 1.688 1.688 1.688 2.125 2.125 2.125 2.688 2.688 2.688 2.688 2.688
0.875 0.875 0.875 1.000 1.000 1.000 1.000 1.000 1.250 1.250 1.250 1.750 1.750 1.750 1.750 1.750
1.266 1.266 1.266 2.313 2.500 2.625 2.750 3.000 3.406 4.234 5.156 4.250 4.250 4.250 4.250 4.250
A A A B B B B B B B B C C C C C
S S S S S S S S S S S S S S S S
0.50 0.60 0.70 0.70 0.90 0.90 1.00 1.30 1.60 3.40 5.90 7.00 9.60
Roller Diameter
0.312" 0.275"
Nominal Tooth Width:
How to Order Code: Example Model # for 40 Pitch Multi-Strand TAPER-LOCK ® Carbon Steel Sprockets A D 40 C TL 42
Chain Pitch in Inches
Altered !!
Multi-Strand
Hub Type
TAPER-LOCK ®
Number of Teeth
A Style
A: No Hub
Extension
15
16
17
11.40 15.40 31.60
B Style
B: Hub Extension One Side
18 19
20 21
23 25
30 36
TAPER-LOCK ® hub with set screws
A: Alteration Required
13.663
D: Double Strand
40: 1/2" Pitch
C Style
* Please reference TAPER-LOCK ® bushing dimension table on page 190 for specific information on MAX Bore and keyway data.
C: Hub Extension Both Sides
42 48
52 60
84
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TOOTH (NOMINAL) PLATE THICKNESS .275˝ NOMINAL PLATE THICKNESS 0.841˝
TOOTH (NOMINAL) PLATE THICKNESS .275˝ NOMINAL PLATE THICKNESS 0.841˝
PLATE THICKNESS TOOTH (NOMINAL) .275˝ NOMINAL PLATE THICKNESS 0.841˝
TAPER-LOCK ® bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK ® Bushings
Bushing #
Bore Range
1008 1210 1610 2012 2517
0.500 - 1.000" 0.500 - 1.250" 0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688"
LTB
LTB
LTB
STYLES TYPEA
STYLES TYPEB
STYLES TYPEC
www. ustsubaki .com
56
57
TAPER-LOCK ® is a registered trademark of Rockwell Automation.
Powered by FlippingBook