HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 50
Chain Data Size
50
Pitch
5/8" 3/8"
Inside Width
5/8” Pitch
Double Single
Roller Diameter
0.400" 0.343"
Nominal Tooth Width:
A DS 50 A 23 How to Order Code: Example Model # for 50 Pitch Double Single Carbon Steel Sprockets
Altered !!
Multi
Chain Pitch in Inches
Hub Type A: No Hub
Number of Teeth
15 17 19 21 23 16 18 20 22 24
A: Alteration Required
DS: Double Single
50: 5/8" Pitch
Extension
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 182.
ADS 50 ATL 24 How to Order Code: Example Model # for 50 Pitch Double Single TAPER-LOCK Carbon Steel Sprockets
Altered !!
Multi
Chain Pitch in Inches Hub Type TAPER-LOCK
Number of Teeth
17 19 23
TAPER-LOCK hub with set screws
A: Alteration Required
DS: Double Single
A: No Hub
50: 5/8" Pitch
Extension
18 21 24
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TAPER-LOCK bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
TAPER-LOCK Bushings
Bushing #
Bore Range
1610 2012
0.500 - 1.688" 0.500 - 2.125"
66
Powered by FlippingBook