HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 50
Chain Data Size
50-2 5/8" 3/8"
Pitch
Multi-Strand Taper-Lock
Inside Width
5/8” Pitch
Roller Diameter
0.400" 0.332"
Nominal Tooth Width:
How to Order Code: Example Model # for 50 Pitch Multi-Strand TAPER-LOCK Carbon Steel Sprockets A D 50 C TL 42
Chain Pitch in Inches
Altered !!
Multi-Strand
Hub Type
TAPER-LOCK
Number of Teeth
A Style
A: No Hub
14 16 18 15 17 19
Extension
B Style
TAPER-LOCK hub with set screws
B: Hub Extension One Side
A: Alteration Required
D: Double Strand
50: 5/8" Pitch
20 25 21 30
C Style 36 48 60 84 42 52 60
C: Hub Extension Both Sides
!! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
TAPER-LOCK Bushings
TAPER-LOCK bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
Bushing #
Bore Range
1008 1210 1610 2012 2517
0.500 - 1.000" 0.500 - 1.250" 0.500 - 1.688" 0.500 - 2.125" 0.500 - 2.688"
70
Powered by FlippingBook