HOW TO ORDER U.S. TSUBAKI STOCK SPROCKETS
No. 60
Chain Data Size
60
Pitch
3/4" 1/2"
Inside Width
3/4” Pitch
QD
Roller Diameter
0.469" 0.459"
Nominal Tooth Width:
A 60 SDS 19 How to Order Code: Example Model # for 60 Pitch QD Carbon Steel Sprockets
Altered !!
Chain Pitch in Inches
QD Hub Type
Number of Teeth
11 12 13 14 15 16 17 18 19 26 27 28
JA: QD Hub 11 - 13 tooth sprocket
SH: QD Hub 14 - 16 tooth sprocket
20 21 22 30 32 35
23 24 25 36 40
SDS: QD Hub 17 - 25 tooth sprocket
A: Alteration Required
60: 3/4" Pitch
SK: QD Hub 26 - 40 tooth sprocket
42
54
72
96
SF: QD Hub 42 - 96 tooth sprocket
45 48
60 70
80
84 !! Alteration field only to be denoted if a deviation from standard is required. Please reference Alterations in engineering section, page 210.
QD bushing is not included with the sprocket. They are to be ordered separately. Please refer to the table below for general guidelines. Specific details are found in the Bushing Section of this catalog beginning on page 188.
QD Bushings
Bushing #
Bore Range
JA SH
0.500 - 1.250" 0.500 - 1.688" 0.500 - 2.000" 0.500 - 2.625" 0.500 - 2.938"
SDS
SK SF
QD is a registered trademark of, and is used under license agreement from Emerson Electric Co.
88
Powered by FlippingBook