1. Transmission Chains
LACING
2 x 2
4 x 4
6 x 6
CHAIN SIZE
AL622
AL644
AL666
LACING
2 x 3
3 x 4
4 x 6
CHAIN SIZE
BL623
BL634
BL646
Figure 1.24 Leaf Chain Lacing Patterns
Table 1.10 Difference Between AL6 Series and BL6 Series
AL6 Series
BL6 Series
Pin Diameter
5.94
7.90
Plate Thickness
2.4
3.2
Plate Height Plate Lacing
15.6
18.1
2X2, 4X4
2X3, 3X4
Even lacing is standard.
Odd lacing is standard.
Selection and Handling (1) In roller chains, all the link plates have higher fatigue resistance due to the compressive stress of press fits. In Leaf Chains, only two outer plates are press fit. Therefore, the tensile strength of Leaf Chains is high, but the maximum allowable tension is low. Use safety guards at all times, and be particularly alert to assure that the safety factor is in the manufacturer’s catalog. Use extra safety factors where consequences of chain failure are severe. (2) The more plates used in the lacing, the higher the tensile strength. But this does not improve the maximum allowable tension directly; the number of plates used may be limited.
119
Powered by FlippingBook