Applications
2.2 SPECIALTY CHAINS
2.2.1 Step (Escalator) Chain Small size conveyance: Escalator
Application Example Step Chain, which is also called Escalator Chain, moves the steps on escala- tors or drives moving sidewalks (Figure 2.9).
Figure 2.9 Step (Escalator) Chain
Construction and Features In escalators, the steps are installed about every 400 mm, however, widths and heights are different. The tensile strength of step chains ranges from 6 to 30 tons. The 9-ton type and 15-ton type are most common. The chain pitch should be as small as possible to reduce the effects of chordal action, which is caused by the chain/sprocket engagement. Using the smallest size possible allows the chain to operate more smoothly (Table 2.5). The way steps are installed on chains differs from country to country. In Japan, the bearing part is in the center of the chain plate, so the step shaft is installed there. In other countries, extended pins are used as the shaft for the step (Figure 2.10).
134
Powered by FlippingBook