Basics
2.Guide rail with catenary arrangement Support the return chain side, in part, and have a catenary section as shown in Figures 6.6 (2) through (5). There are many advantages to this arrangement. The guide rail with catenary makes it easier to manage excessive chain (caused by temperature or abrasion) and to maintain proper tension. This arrangement is applicable to low-speed drives. The amount of sag should be 10 percent of the span. It is not appropriate for conveyors with reversing drives. 3.Bottomside conveying arrangement The return side is on top in this arrangement. It is possible to make the return side act as the catenary take-up. Caution must be exercised so that the two sides of the chain don’t touch each other.
Take-Up
(1) Return Side with Guide Rail Support and Take-Up on Driven Shaft
Take-Up
(2) Return Side with Catenary Section and Partial Guide Rail Support
Take-Up
(3) Return Side with Catenary Roller Section
Take-Up
(4) Return Side with Catenary Guide Section Support
Take-Up
(5) Return Side with Catenary Section
Figure 6.6 Horizontal Conveyor Arrangements
66
Powered by FlippingBook