ENERGY AND SIGNALS
STANDARD applications
TKA Series Chip-tight right to the end
Secure cover attachment even under severe stresses (e.g. due to hydraulic cables) D esigns with inward or outward opening covers Cable-friendly interior space wit- hout sharp edges Cover completely detachable on one side Q uick and easy opening from any vantage point C onnecting pieces with optional strain relief D ividers and height separation for cables C hain links made of glass fiber-reinforced plastic
1
4
2
5
1
2
3
10
3
4
5
6
6
7
8
7
8
9
C over sheet for universal mounting bracket Integrated noise damping system Pin and bore connection and stroke system covered completely
9
10
11
2
11
Example of cross section
Travel path unsupported
Travel path gliding
Pitch
Height
Width
Load
Travel speed
Acceleration
up to 150 m
30.5 – 55.5 mm
15 – 175 mm
up to 10 kg/m up to 6 m
up to 9 m/s
up to 45 m/s 2
20.5 – 45 mm
The assigned values are average values. Depending on the specific application,the maximum values may differ significantly. For detailed information please contact us.
Splash- and dustproof – in more than 300 sizes Impermeability against chips, excellent cable protection also in the connection area TKA55: IP54 tested and attested (TÜV NORD) On request, also in special material with protection against hot chips up to 850 °C Quick routing of the cables, easy to open
Inner or outer opening variants available Extensive unsupported length due to 3-fold stroke system Integrated gliding surfaces for gliding arrangements Suppressed against vibration and noise using an internal damping system High torsional rigidity
TKA30
TKA38
TKA45
TKA55
hi 20.5 mm
hi 26 mm
hi 36 mm
hi 45 mm
6 inside widths 15 – 65 mm
6 inside widths 25 – 130 mm
5 inside widths 50 – 150 mm
6 inside widths 50 – 175 mm
More Information: call: 800-443-4216 or visit: ustsubaki.com
6
Powered by FlippingBook