S/SX1800 RMD | Inner distribution | TS0 · TS1 · TS3
Divider systems
As a standard, the divider system is mounted on every 2 nd cover/chain link (HS).
As a standard, dividers or the complete divider system (dividers with horizontal shelves) are movable in the cross section (version A) .
Inner heights
104
Divider system TS0 without horizontal shelf
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
Chain widths 250 – 1000
A
104
21.5 25 17.5 –
The dividers can be moved in the cross section.
KR
End divider
a T
a x
a c
a T
25 7.5
B i
Incre- ments
Divider system TS1 with continuous horizontal shelf
1 mm
VD1 VD2 VD3 VD4
VD5
VD23
a x min [mm]
a c min [mm]
n T min
Vers. a T min [mm]
28.5
40.5
40.5
A
21.5 25 17.5 2
52.5
64.5
4 1 5
76.5
2 3
19
The dividers can be moved in the cross section.
70.5
46.5 58.5
Ø 5
34.5
34.5
22.5
KR
End divider
a T
a x
a c
a T
25 7.5
B i
Divider system TS3 with horizontal shelf consisting of plastic partitions
VR0 VR1 VR2 VR4 VR6 VR8 VR10 VR45 VR167
a x min [mm]
a c min [mm]
n T min
a
Vers.
T min
[mm]
25 18
32
32
38
A
38*/16.5**/12*** 16/42* 8 2
6 10 2 3 7 11
4
53 46 39
8 4 1 5 9
17 17
104
24
* For aluminum partitions ** For VR0 *** For version with horizontal shelf to the end divider
75 82
54 61 68
47
34
26
KR
The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.
End divider without VR0
a T
a x
a c
15
8
a T
B i
a x (center distance of dividers) [mm] a c (nominal width of inner chamber) [mm]
4
When using plastic partitions with a x > 112 mm , we recommend an additional center support with a twin divider (S T = 5 mm). Twin dividers are also suitable for retrofitting in the partition system. 16 18 23 28 32 33 38 43 48 58 64 68 81015202425303540505660 78 80 88 96112128144160176192208 70 72 80 88104120136152168184200
a x
Aluminum partitions in 1 mm increments with a x > 42 mm are also available.
687
Powered by FlippingBook