Configuration guidelines | Selecting the cable carrier
1.7 Consideration of relative displacement An arrangement where the cables are placed next to each other in a single layer is preferred. This arrangement is recommended to keep the relative displacement of the cables as low as possible.
Y
L = π × KR Length of neutral fiber
Neutral fiber: The length of the line does not change during the bending process.
KR cable
∆L = π × Y Length of relat. displacement
KR
Extended length: π × KR
π × Y
Ø
Due to the off-center placement, the cables move in the cable carrier by the value of the relative displacement. This can cause increased cable wear on the crossbars.
69
Powered by FlippingBook