Guide channels | Install. Dim. | Opposed Arrangement
Opposed arrangement – using reverse bending linkings to accept a lowered drive arm (standard)
L Z1
L S
L S 2
U B
L Z1
Moving bracket
RKR
RKR
l 1
X
L B
KR
H
Fixed bracket
L KA '
X
L KA
Connection height with lowered moving bracket connection Connection height H H = 3 h G
Calculating the channel length
Addition for loop overhang Addition L Z1 L Z1 = ^ U B + 50 mm
Channel length L KA L KA = L S + 2 L Z1 + X
Opposed arrangement – without a lowered drive arm
L Z1
L S
L S 2
U B
X
L Z1
Moving bracket
l 1
KR
L B
H
Fixed bracket
L KA '
X
L KA
Addition for loop overhang Addition L Z1 L Z1 = ^ U B + 50 mm
Calculating the channel length
Connection height high connection Connection height H H = 2 x KR + h G
Channel length L KA L KA = L S + 2 L Z1 + X
Depending on the chain size, the inner channel width is 4-5 mm larger than the width of the cable track. Depending on the travel length, the connection height of the cable carrier must be reduced. Please contact us! We will be happy to calculate the suitable guide channel for your application.
For different distances between the fixed points and driven points in your application please contact us.
The calculations for the cable carrier length and the length of the cable carrier in the bend radius can be found in the respective cable carrier chapter.
705
Powered by FlippingBook