Standard Channel | Mounting Elements
Standard mounting with angle brackets (standard)
The angle brackets are mounted at the joins, ensuring precise connection of the joint areas in addition to fixing the channel to the substructure. ■ ■ Optimum alignment of the joins ■ ■ Reduced installation times ■ ■ Minimum number of screw connections ■ ■ Reliable mounting, even under rough conditions
s
h KA
2
s
3
1
9
16
40
40
40
The figure shows an open channel version
s [mm]
X1 [mm]
b 2 [mm]
2 3
104 106
b 1 + 54 b 1 + 56
Calculating C-profile length C-profile length L P L P = b 1 + 106 C-profile length L P rounded to 50 mm
Suitable perforated C-profiles can be found from page 733
As a standard, the angle brackets included with the delivery are installed on all joins as well as at both ends of a channel. If you require more angle brackets beyond this, please state this when ordering. The sheet metal thickness “s” corresponds to the respective wall thickness “s” of the channel.
Mounting kit (optional)
The delivery scope of the standard channel does not include the optional joining clamp mounting kit.
The length of the C-rail depends on the channel width and is supplied in standard lengths. Please contact us if you require custom lengths.
Mounting kit 1 C -rail (length depends on b 1 ) 2 H exagon socket screws 3 S lide nut
714
Powered by FlippingBook