Nylon Polymer Material Specifications & Details
Standard Color: Black is the standard color. Molded plastic cable and hose carriers can be supplied in other colors. Standard Material: 35% Glass fiber reinforced Nylon 6 resin.
Molded plastic cable and hose carriers can be supplied in other colors including red, green, blue, yellow, orange and many more. Please remember to always provide correct PMS color code(s) for special color(s). — Special Order Only! Molded plastic cable and hose carriers for application in the range of radioactive radiation or for permanent temperatures below –40° F (40° C) require special additives and can also be supplied by KabelSchlepp. The plastic used is free of halogens, silicon and heavy metals such as lead and cadmium. No formaldehydes are used in the manufacturing process. Plastic components meet food industry standards and can be used without restriction. Please give us detailed information on your environment conditions. All nylon chains are also available in flame retardant materials of various colors. — Special Order!
Admissible Operating Temperatures Standard Operation: –40°F (–40° C) to 266° F (130° C) for short term operation: 392° F (200° C) Chain side bands reinforced for high strength, stiffness, straightness, and performance at elevated temperatures.
UNITS
REINFORCED NYLON 6
TEST METHOD
TEST
ENGLISH
(METRIC)
ENGLISH
(METRIC)
Key mechanical properties Tensile strength at yield
PSI
(MPa)
D-638 D-368 D-790 D-790 D-256 D-648 D-785
28,500
(197)
Ultimate elongation Flexural strength Flexural modulus
%
3
PSI PSI
(MPa) (MPa) (J/m)
40,500
(279)
1,500,000
(8,966)
Notched izod impact strength Heat deflection temp. @ 264 PSI Rockwell hardness (M scale)
ft. lbs. /inch
3.4 419 104
(183) (215)
°F
(°C)
Shrinkage (1/8" bar)
in./in.
0015
General physical properties Specific gravity
D-792 D-789
1.41 428
Melting point
°F % %
(°C)
(220)
Equilibrium moisture content @ 50% RH
2.0 6.2
Saturation moisture
in.
1.0 x 10 -5
(1.8 x 10 -5 )
(mm)
°C
Coefficient of linear thermal expansion
°F
D-696
(mm)
in.
3.6 x 10 -5
(6.5 x 10 -5 )
Flammability (1/16" bar)
UL-94
94 HB
Chemical resistivity of the standard KabelSchlepp nylon material. (The data listed below was developed in actual laboratory tests (factory certified). Please contact us for all materials not shown in this table.) Against Resistance Against Resistance Against
Resistance
Acetic Acid
■
Formaldehyde and Polymac.
●
Oleic Acid
●
●
Formic Acid
●
Paint & Lacquers
●
Acetone
■
Greases and Waxes
●
Paraffin, Paraffin Oil
●
Ammonia
● ● ● ● ● ■
Hydraulic Oils
● ■ ●
Polyester Resins
● ● ● ● ● ● ■ ● ● ●
Benzine, Benzole
Hydrochloric Acid (aqueous)
Potassium Hydroxide
Bitumen
Lactic Acid (aqueous)
Potassium Chloride (aqueous)
Boric Acid (aqueous)
Lactic Acid
▲ Potassium Nitrate (aqueous)
Butyric Acid
Liquid petrol gas. (DIN 51622)
● ● ● ● ● ● ●
Propane Gas, Propyl. Hydride Sodium Carbonate (aqueous)
Calcium Chloride (aqueous) Chlorine, Chlorinated Water
Lubricants, Edible Fats
▲ Mercury
Tartaric Acid
Chromic Acid (aqueous)
● ● ● ●
Methyl Acetate
Tartaric Acid (aqueous)
Diesel Oil
Milk
Vaseline
Ethanol
Mineral Oil
Xylene
Ethyl Acetate
Oil - Edible and Lubricating
Fluorinated Hydrocarbons
● = Resistant
■ = Conditionally Resistant
▲ = Not Resistant
Specifications are subject to change without notice. KSA-0810-GC
2.22
Powered by FlippingBook